Völkl Blaze 114 24/25 Freeski
Product description
The sustainable freeride adventure ski at it's best.
To cut to the chase: The Blaze 114 is as wide as its range of use. In addition, it is also produced in an environmentally friendly way. Völkl uses a recycled base and only FSC-certified wood in combination with the Green Core technology. The Isocore inside the wood core is made of recycled PET bottles instead of the conventional PU foam. When it comes to riding performance, the Blaze 114 is destined for off-piste adventures. Thanks to its efficient weight-performance ratio, it is also quite suitable as a freeride touring ski. But it really comes to life on the downhill. The rather narrow 18 m radius in relation to a ski length of 192 cm delivers a maneuverability previously unknown in this category. This is additionally supported by an open radius both at the shovel and at the tail combined with tip & tail rocker. To enable smooth running at high speeds, a 0.3 mm thin titanal sheet was added to the 3D Radius Sidecut in the center of the ski right above the sidewall. Thus, the ski can be controlled with great precision - you will notice this in every turn initiation. By the way, these riding characteristics also work really well on the occasional on-slope rides too! To keep the all-mountain ski as agile as possible, no titanal is used in the outer areas front and rear. The Blaze is designed with increasing flex in relation to the length of the ski, so that larger or heavier riders benefit from the same driving characteristics as the smaller or lighter riders with shorter ski lengths.
The combination of beech and poplar results in an extremely durable wood core composed of hard wood in the binding area and lighter wood around.
Direct and strong powertransmission with full length sidewalls.
A thin Titanal layer (0,3 mm) under the binding delivers the necessary strength to the ski. This way the binding screws offer reliable hold even in the toughest conditions.
Inserts made of elastic TPU material on the edges of the tip and tail which act like a bumper in wind-blown or tracked snow. Its shock-absorbing elasticity ensures better stability and catch-free float.
Three radii in one ski for macimum truning and speed versatility in AllMountain skiing.
LONG TIP & TAIL RADIUS Usage of long radii at tip and tail for big turns and high speed
- easy steering and maneuverability
- disruption resistant at the tip
- no radius limitation and ease of turn exit
TIGHT CENTER RADIUS Usage of shorter radius in the center for short turns and lower speed
- extremely easy to initiate short turns
- strikingly agile
- effortless and smooth in short turns
Bends up only in the shovel and tail zones, with a camber shape in the middle.
A sintered high-density and high molecular polyethylene base with great gliding characteristics and high durability.
BRUSHED base structure on flat skis with wider widths Superficial & shallow structure matches with wide skis and their bigger bearing face › optimum agility & turning characteristics.
- Less catching
- Easier & smooth turn initiation
Technical data
Lenght (cm) | Radius (m) | Sidecut (mm) | Weight/ pair |
---|---|---|---|
166 | 15,0 | 154 - 114 - 136 | - |
176 | 17,0 | 154 - 114 - 136 | 3790 g |
184 | 18,0 | 154 - 114 - 136 | 3890 g |
192 | 20,0 | 154 - 114 - 136 | 4040 g |